I have been struggling to get my Rzr back on the road for a while now. The problems started when I purchased new front A Arms. I got the high ground clearance ones from super ATV. After installing them, I have tried to get front end aligned but no matter where it was set (toe'd in/out/straight) it just did not handle or drive correctly. Also the caster/camber has been adjusted several times. During this time, I noticed that the 4x4 was inop. The front tires were nearly impossible to turn while rotating forward but would turn free rotating backwards & the 4x4 worked in reverse. After receiving advice that my problems may be the spraigue carrier, I took the front diff off to find it in pieces. I purchased the $139 one from super ATV and installed it. Now it rolls free forward but when you put it in 4x4 the front end acts like it's pulling down towards the ground. Also, it don't turn well at all in 4x4.
↧
