center / bump seat install with snorkels
Hey all, Im installing a center / bump seat but I have snorkels. I've got a few ideas on what I'm going to do with the tubing to get it out of the way, but was wondering what others have done. I was...
View ArticleStock A arms
Hi. I’m new to the RZR world. I just bought a 2009 RZR 800. It has aftermarket A arms that take the width out to 64”. I want to take it to Taskers Gap in VA. That place says the trails are 52”. I’m...
View Articlerzr 800 fuel pump don't go and won't turn over
hi i have a 2014 rzr 800 my fuel pump won't go when turn the key on and engine won't turn over ,i cleaned the grounds under the seat it worked than i went out today and the same thing nothing ,the...
View ArticleBrake Pedal Adjustment
Trying to install my new Spring Brake Thingy. Thank you Daryl! I sent you a PM but who knows if it got to you as I have found they are very unpredictable on here. Anyway it needs to be adjusted so the...
View ArticleNewbie
I just got a 09 800s and was just seeing if there anything I should be checking regularly any any common issues.Also wanted a download for a service manual tried the search but not very...
View ArticleWhat year s exhaust fit 09
Hello, so i think i suck at searching. Im trying to figure out what year s stock exhaust will fit on my 09 800. Does anyone know? Thank you!
View ArticleNew guy Vertex piston review
I have been into RZR’s for about 3 months and I feel like I know these 800’s pretty good. My first one was an S with a turbo. I rebuilt the motor with CP low comp pistons did the pinion dance and...
View ArticleSway Bars
Hi All, New to the forum and new to s x s, but have been riding 4 wheeler for years. My question is I have a all stock 2008 rzr 800 with only mod being a 2 inch shock lift. Normal trail riding no...
View Articleoil around gear case. 2012 800 s
After the last ride (and easy one, just a few trails) one of the MSA wheels stripped the lugs and fell off RIGHT before we got back to the trailer, and while putting everything back on today I noticed...
View Article14 800 EPS
Please do tell me what the fuel pressure is supposed to be on this 2014 800 EPS. I have searched everywhere here and only have vague suggestions that it should be around 58 lbs. Thanks to anyone who...
View ArticleClik here to view.
Pro Armor Aluminum door score!!!
I just picked up a Pro Armor drivers side door (for cheap) for my 2011 RZR... the aluminum door is the drivers side. The guy I got it from had his RZR burn and the passenger door was not salvageable....
View ArticleTrans/Transfer case leaking
I have a 2010 800 and I'm leaking out of the trans case where the two halves meet. Im trying to fix this problem without having to pull the case and crack it. I have read several posts where members...
View ArticleClutch/belt question
New to the rzr game but very much into sleds so I do understand clutches.Im having squealing coming from clutches to me my belt looks likes its riding fairly high in the secondary the cogs and then...
View ArticleWhat's on the end of the fuel tank vent hose?
I have 2 08 800's, and one of them with 5500 miles wouldn't get up to speed, about 40 is all it would do, and wouldn't hit 5k rpm. So in trouble shooting I checked fuel pressure and it was fine, then...
View ArticleLocking up
Polaris rzr 800s about a week ago, and now it feels like after you drive about a mile or so it try’s to Lock up on you like it’s gearing down real hard and I can’t figure out what’s going on with!!
View ArticleHighlifter wheels on 2014 800s
I got a set of highlifter wheels for my 2014 800s, everything seemed to bolt up tight should I be good? Or is there anything else I need to do to it?
View ArticleRzr wont accelerate past 40mph sometimes
Hello: I'm new to the rzr world and bought a 2010 rzr 800. Sometimes it wont accelerate past 40 mph at 5500 rpm and feels like its dragging. Other times its takes right off and tops out around 55mph...
View ArticleDrive shaft
Found out my clicking noise was from the drive shaft, u-joints were shot. Problem is cant get it to slide off the t-case. Removed the u-joint and got the shaft out of the way. Penetrating fluid and...
View Articlepower steering
Just installed super atv eps on my 2012 and man what a difference! Totally worth it. Aside from the obvious (less steering input) the reduction in steering feedback is the nicest surprise. Especially...
View Article2010 800
Starts and idles fine but when engine warms up engine only runs on one cylinder. No codes on diagnostic mode. Fuel pressure is 41 psi . swapped ECU does the same thing. Any ideas on this would be...
View Article
