We have a RZR 800 2008. Changed the entire steering linkage with a new heavy duty preassembled system which was entirely built. We just needed to get the old one off which was a challenge. The new net on with limited issues and the unit steers smoothly now but we still need to get the steering wheel center with the vehicle alignment. HOWEVER, ever since we replaced the linkage now we have a click click click coming from the drive shaft or wheel hubs which wasnt there before we took the old one off. However, when in neutral and rolling up and down a hill backwards or upwards we don't seem to make the noise. It only clicks when in drive going forward or backward and makes a louder and faster noise as the vehicle moves faster in either direction. The steering linkage doesnt connect to anything in the drive shaft so we can't figure out why the noise has started after changing the new front end steering box and linkage. ANYONE KNOW WHAT THIS CAN BE FROM? DO we have the new linkage too tight and it's causing stress on the wheel hubs creating the click click?
ANY HELP OUT THERE WOULD BE HUGE SINCE WE WANT TO SELL THIS 800 because we bought our new TURBO. HOWEVER WE DONT WANT TO SELL TO SOMEONE KNOWING THAT THEY MAY HAVE A POTENTIAL ISSUE.
THANKS TEAM
RZRS
Kris
ANY HELP OUT THERE WOULD BE HUGE SINCE WE WANT TO SELL THIS 800 because we bought our new TURBO. HOWEVER WE DONT WANT TO SELL TO SOMEONE KNOWING THAT THEY MAY HAVE A POTENTIAL ISSUE.
THANKS TEAM
RZRS
Kris